Assembly Instructions - Master Forge MFY784BDP Manual De Instrucciones

ASSEMBLY INSTRUCTIONS

1. CAUTION: This unit is HEAVY! Do not attempt
this step without assistance!
With the assistance of a helper, turn the smoker
body (I) upside down on a stable, sturdy surface.
Align a leg (A) with the mounting holes on the
bottom of the smoker body and secure together
using 3 M6x12 screws (AA), threading them
through the holes from the outside of the unit.
Repeat for the other three legs. Tighten all screws
using a Phillips screwdriver (not included).
Hardware Used
AA
M6x12 Screw
2. Attach the burner and control unit.
Open the lower door of the smoker body (I).
Turn the burner and control unit (B) upside
down and place it on the bottom of the smoker
body (I), making sure the 4 mounting holes on
the burner and control unit (B) are aligned with
the holes on the smoker body (I). Note: The
control knob should be on the same side as the
door. Check that the burner is properly installed
on the orifice before attaching the burner and
control unit (B). Thread four M6x12 screws (AA)
through holes from outside of unit. Securely
tighten the unit to the bottom with a
Phillips screwdriver.
Hardware Used
AA
M6x12 Screw
1
x12
2
I
x4
8
A
B
Lowes.com/masterforge
AA
I
AA