Noise And Vibration - Flex LW 1202 SN Instrucciones De Funcionamiento Originales

Noise and Vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power
tool is typically:
LW 1202 N/~SN
LW 1503/~S
LW 802 VR/~S
Total vibration value (3-axis) when grinding
natural stone with corundum grinding rings
(LW 1202 N/~SN, LW 802 VR/~S) or with
Velcro diamond wheels (LW 1503/~S):
LW 1202 N/~SN
LW 1503/~S
LW 802 VR/~S
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
16
89 100
91.5 102.5
90 101
a [m/s²]
h
3.0 – 1.5
– 3.1 1.5
4.9 – 1.5
LW 1202 N/~SN / LW 1503/~S / LW 802 VR/~S
NOTE
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given
in EN 60745 and may be used to compare
one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different appli-
cations, with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working period
For a precise estimation of the vibration load
the times should also be considered during
3
which the power tool is switched off or even
running, but not actually in use.
3
This may significantly increase the
exposure level over the total working period
3
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and the
accessories, keep the hands warm,
organisation of work patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).