Technical Specifications - ResMed Ultra Mirage Manual Del Usuario

8 Fit the grooved edge of the mask
cushion to the mask frame. Fit the top
section first, then work your way around
the mask, pushing the cushion onto the
frame, ensuring a good seal has been
achieved.
Then push the cushion clip over the
cushion onto the mask frame, ensuring it
clicks into place in all locations (Fig. F-6).
9 Attach the forehead pads to the
forehead support by inserting the pad
plugs into the two holes on the back of
the forehead support (Fig F-7). Push the
pads firmly against the forehead support
to ensure that the pads fit securely into
the forehead support.
10 Connect the forehead support to the
mask frame. Slide the pivots into the
pivot slot on the mask frame (Fig. F-8).
Depress the forehead support tab and
move it into any of the tab positions.
11 Insert the headgear clips into the slots
on the mask frame. The headgear label
should face outwards and be near your
neck when fitted.
T S
ECHNICAL PECIFICATIONS
P –F
RESSURE LOW
See section A on the illustrations sheet.
D S I
EAD PACE NFORMATION
Dead space is the empty volume of the
mask up to the swivel.
The dead space of the mask varies
according to cushion sizes but is less than
258 mL.
Note:
The manufacturer reserves the right
to change these specifications without notice.
C
URVE
R P
EPLACEMENT
Part No. Item
16613 Anti-asphyxia valve (1 pk.)
16604 Cushion, Small, Standard (1 pk.)
16671 Cushion, Small, Shallow (1 pk.)
16605 Cushion, Medium, Standard
(1 pk.)
16672 Cushion, Medium, Shallow
(1 pk.)
16606 Cushion, Large, Standard (1 pk.)
16673 Cushion, Large, Shallow (1 pk.)
16674 Cushion clip, Small (1 pk.)
16675 Cushion clip, Medium (1 pk.)
16676 Cushion clip, Large (1 pk.)
60683 Elbow retainer (1 pk.)
16509 Exhaust vent (1 pk.)
16510 Exhaust vent (10 pk.)
60681 Luer lock port caps (2 pk.)
60682 Luer lock port caps (10 pk.)
16689 Swivel (1 pk.)
60680 Swivel clip (1 pk.)
16637 Swivel clip (5 pk.) and Elbow
clip (5 pk.)
16624 Valve elbow (1 pk.)
16617 Valve membrane (1 pk.)
16618 Valve membrane (10 pk.)
60115 Headgear clip (2 pk.)
60116 Headgear clip (10 pk.)
60123 Forehead pad (1 pk.)
60124 Forehead pad (10 pk.)
60670 Mask Frame, Small (1 pk.)
60671 Mask Frame, Medium (1 pk.)
60672 Mask Frame, Large (1 pk.)
60673 Forehead Support (1 pk.)
60674 Headgear (1 pk.)
60620 Frame System with cushion,
(excluding headgear) Small,
Standard
ARTS