Wayne Dalton TorqueMaster Plus 9100 Instrucciones De Instalación Y Manual Del Propietario página 21

16
Adjusting Top Brackets
Tools Needed:
With horizontal tracks installed, you can
now adjust the top brackets.
7/16" Wrench
Vertically align the top section of the
door with the lower sections. Once
aligned, position the top bracket slide,
out against the horizontal track.
Maintaining the slide's position, tighten
the (2) 1/4" - 20 flange hex nuts to
secure the top roller slide to the top
bracket base.
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
TOP
SECTION
(2) 1/4" - 20
FLANGE HEX
NUTS
TOP
SECTION
CORRECT
TOP
SECTION
INCORRECT
HORIZONTAL
TRACK
TOP
BRACKET
SLIDE
21