Extraordinary Maintenance; Meb-New" Electronic Card Programming - Frigomat T Serie Manual De Uso Y Manutención

6.2 EXTRAORDINARY MAINTENANCE (FOR QUALIFIED PERSONNEL)
These operations shall be carried out by qualified and authorized personnel only.
FRIGOMAT S.r.l. declines any liability for damages to things or persons deriving from the
non-observance of the above-mentioned prescription.
The parameters of the "MEB-NEW" electronic card shall be programmed by authorized
engineers only. The change of these parameters may affect the machine performance.

6.2.1 "MEB-NEW" ELECTRONIC CARD PROGRAMMING

+
Follow the instructions below to program the electronic
card:
1. When the machine is in its STOP position, push
simultaneously UP and DOWN for at least 5" until the
" 0 - - " appears on the display. Insert the password (to
obtain the password please revert to the FRIGOMAT
service dept.). Use the UP and DOWN pushbuttons to
digit the numbers, then press ENTER to confirm the
password.
2. Once entered the programming mode, scroll the list of
the available programming steps (for example: T1, T2,
T3....) by means of the UP and DOWN pushbuttons.
3. Once reached the programming step to be modified,
press ENTER pushbutton to confirm and visualize the
current setting.
4. Use the UP and DOWN pushbuttons to change the
data or scroll the list of the available options.
5. Press ENTER pushbutton to store the right data in the
current programming step.
6. Press the STOP pushbutton to quit programming and
save the modifications.
ENGLISH - 20