Frigomat T Serie Manual De Uso Y Manutención página 41

5.3.2 GELATO PRODUCTION WITH TIME CONTROL
15 - ENGLISH
- By pressing the TIME PRODUCTION pushbutton
the display lightens, indicating the last time
setting. Pushbuttons UP – ENTER – DOWN
lighten as well. Now the machine is ready to enter
a new duration time of the freezing cycle.
If after 5 seconds no pushbutton will be pressed,
the machine will automatically start according to
the last time set displayed.
- Increase and decrease the time by means of the
UP and DOWN pushbuttons. Once obtained the
desired value push ENTER to save the data. The
freezing cycle starts.
The longest possible freezing duration is 30', but
such long times might only be selected
presence of some extremely hot mixes.
- After the selected
compressor stops, the TIME PRODUCTION
pushbutton blinks and a beep tone warns the
operator that the ice-cream is ready for delivery. If
the ice cream draw cannot be performed
immediately ,
consistency level falls by a predetermined
percentage
PRESERVATION phase begins. This can be
stopped at any time with the delivery of the ice-
cream.
- Press DELIVERY pushbutton to draw the ice-
cream out and completely open the delivery door
by means of the apposite lever.
time has
the agitator turns
value and the
in
elapsed the
until the
ice-cream