Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Warning:
•
Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the standards in force.
•
All the equipment must only be used for the purpose it was designed for. Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for modifi cations made by
third parties for any reason or purpose, and for the use of accessories and materials which are not originals.
•
All the products comply with the requirements of Directive 2006/95/EC (which replaced Directive 73/23/EEC and subsequent amendments), as certifi ed by the CE mark they carry.
•
Do not route the riser wires in proximity to power supply cables (230/400V).
•
Installation, mounting and assistance procedures for electrical devices must only be performed by specialised electricians.
•
Cut off the power supply before carrying out any maintenance work.
•
Connect the module-holder frame to earth (see Fig.).
•
Do not press and hold the audio hook while the handset is lifted.
•
The camera must not be installed opposite bright light sources, or in places where the fi lmed subject is against the light. To resolve this problem, we
recommend modifying the installation height of the camera, which is usually 160 - 165 cm, to a height of 180 cm and pointing the lens downward so as
to improve fi lming quality.
•
Cameras with colour CCD sensor have poorer sensitivity in low light conditions than black/white cameras. We therefore recommend, in dimly lit
environments, that an additional light source is installed.
Wiring diagrams
18
18
19
19
19
19
21
21
22
23
24
24
25
25
25
26
26
26
26
27
27
27
28
28
28
29
29
29
30
30
31
32
33
115
116
117
118
119
119
120
120
121
121
122
122
123
123
124
124
125
Capítulos
Tabla de contenido
