Emptying Or Replacing The Filter Bag; Emptying The Drum; Routine Inspection; Accessories - Delta 50-905 Manual De Instrucciones

• While supporting the canister filter assembly from
the bottom, release the spring-loaded band clamp
from the top of the canister filter assembly.
• Carefully tilt the top of the canister filter assembly
in order to clear the cleaning vanes (B).
NOTE: You may have to gently move the vanes in order
to free the canister filter. This should not adversely
affect the operation of the machine.
• With the canister filter removed use a compressed
air gun to thoroughly clean between the pleats,
both inside and outside.
• With the aid of another person, carefully re-insert
the canister filter assembly up and over the cleaner
vanes and re-clamp the spring-loaded band clamp
at the top of the assembly.
• Secure the canister filter assembly to the cross
support with the hex bolt and flat washer.
• Attach a clean filter bag using the spring-loaded
band clamp.

EMPTYINg ThE dRUM

Periodically inspect the contents of the drum and
empty as needed. To inspect the contents of the drum:
• Raise the drum lift bar to lower the drum to the
floor.
A complete line of accessories is available from your DELTA
DELTA Factory Service Centers, and DELTA® Authorized Service Centers. Please visit our Web Site www.
®
DeltaMachinery.com for an online catalog or for the name or your nearest supplier.
Since accessories other than those offered by dELTA
use of such accessories could be hazardous. For safest operation, only dELTA
accessories should be used with this product.
To register your tool for warranty service visit our website at www.DeltaMachinery.com.
dELTA will repair or replace, at its expense and at its option, any new dELTA
®
use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a dELTA
center or authorized service station with proof of purchase of the product within five years and provides dELTA
to verify the alleged defect by inspection. For all refurbished dELTA
for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone
other than an authorized dELTA
damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty is dELTA
with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are
expressly disclaimed by dELTA
1-800-223-7278. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in the packaging, call the local company or see website for warranty
information.
MAINTENANCE PROCEdURES

ACCESSORIES

wARRANTY

Five Year Limited New Product warranty
service facility or representative. Under no circumstances will dELTA
®
. For further detail of warranty coverage and warranty repair information, visit www.deltaMachinery.com or call
®
• Roll it away from the machine, inspect and empty
as needed.
EMPTYINg OR REPLACINg ThE FILTER
BAg
Periodically check the filter bag, if it is more than one
third full, it is recommended that you empty it.
NOTE: If the filter bag gets too full, the weight may
force it to pull away from the band clamp, exposing the
user to potentially harmful particulates.
• Release the spring-loaded band clamp at the
bottom of the filter and remove the filter bag.
• Empty or replace the filter bag and re-attach using
the spring-loaded band clamp.

ROUTINE INSPECTION

It is a good idea to routinely inspect any quality
woodworking tool in order to keep it in optimum
condition. This includes inspecting all hardware for
tightness, ensuring the filter is clean, and cleaning
debris and grime from any surfaces and moving parts.
Supplier, DELTA
®
have not been tested with this product,
®
machine, machine part, or machine accessory which in normal
®
product, the warranty period is 180 days. dELTA
®
's sole warranty and sets forth the customer's exclusive remedy,
®
15
Factory Service Centers, and
®
recommended
®
factory service
®
with reasonable opportunity
®
will not be responsible
®
be liable for incidental or consequential
®