Warranty - Utilitech PPTPC50 Manual De Instrucciones

TROUBLESHOOTING (CONTINUED)
PROBLEM POSSIBLE CAUSE
The fl ow rate is 1. The piping or hose is
too low.
2. The voltage is low.
3. The hose diameter is too
4. The discharge hose is too
The seal leaks. 1. The seal is worn.
2. The shaft is grooved.
3. The pump head is loose on

WARRANTY

This product is warranted against manufacturing defects for a period of 12 months from the date of
purchase. Any misuse, abuse, or modifi cation automatically voids this warranty. The distributor will
repair or replace the pump if, in its sole determination, the pump failed due to defects in materials or
workmanship.
WARRANTY EXCLUSIONS
1. Neither the distributor, nor the store that sold this pump, shall in any event be liable for any labor or
similar expenses incurred in removing or repairing this pump.
2. The distributor specifi cally disclaims any implied warranties of merchantability and fi tness for a
particular purpose.
3. In no event shall the distributor be liable for consequential, incidental, or special damages resulting
from or related in any manner to any distributor components or accessories.
4. The distributor disclaims all liability for improper installation or improper use of this product.
Some states do not allow the exclusion or limitation of incidental or consequential damages.
The above limitations and exclusions may not apply to you. In addition to the rights given you
by this warranty, you may also have other rights which vary from state to state.
For warranty claims, DO NOT RETURN THE PUMP TO THE STORE!
Call our customer service department at: 1-800-346-7611, Monday – Friday, 8:00 a.m. – 5:00 p.m.,
EST.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-800-346-7611, 8 a.m. - 5 p.m., EST,
Monday - Friday.
PART DESCRIPTION
E Brush
damaged.
small.
long.
the motor.
PART #
TPC50
CORRECTIVE ACTION
1. Clean or replace the piping or hose.
2. If the voltage is less than 108 volts,
check the wiring size or use a shorter
extension cord.
3. Use a minimum 3/4 in. heavy duty
garden hose.
4. Use as short a hose as possible (max 50
ft.).
1. Replace the seal. Call for replacements.
2. Replace the rotor. Call for replacements.
3. Ensure the pump is assembled properly
and that there is no obstruction.
E
10
Printed in China
®
Utilitech is a registered trademark
of LF, LLC. All Rights Reserved.
Lowes.com