Maintenance And Service; Light Replacement - Thermador Professional Serie Manual Del Usuario

Ocultar thumbs Ver también para Professional Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance and Service

Maintenance
WARNING:
Make sure the appliance and the lights are cool and
power to the appliance has been turned off before
replacing the light bulb(s). Failure to do so could
result in electrical shock or burns.
The lenses must be in place when using the
appliance.
The lenses serve to protect the light bulb from
breaking.
The lenses are made of glass. Handle carefully to
avoid breaking. Broken glass can cause an injury.
Halogen Lights
Turn off the lights and blower. Allow the lights to cool before
handling. If new lights do not operate, be sure lights are
inserted correctly before calling for service.
Halogen Light Replacement
Bulb
Figure 4: Halogen Light Replacement
1. Using a flat edge from a screwdriver or equivalent tool,
pry loose the lens cover, as shown in Figure 4.
2. Pull damaged bulb straight out from the socket to
remove.
Lens
3. Replace with a new 120 V, 40W (maximum) bulb with
G-9 base. Press pins in bulb base straight into socket
until fully seated. Follow package directions and do not
touch new light with bare hands, the oils from your skin
can reduce the longevity of the bulb.
4. Reinstall the light and cover.
Heat Lamps (27" models)
Turn off the heat lamps and blower. Allow the heat lamps to
cool before handling. If new heat lamps do not operate, be
sure lamps are inserted correctly before calling for service.
Heat Lamp Replacement
1. Turn heat lamp counterclockwise to remove.
2. Replace lamp with either a PAR-38 175W heat lamp or
a PAR-40 250W heat lamp.
The PAR-38 175W heat lamp provides a tighter seal within
the enclosure and produces the same amount of effective
heat with lower energy consumption. These lamps may not
be readily available at local retail outlets. The PAR-40
250W heat lamp is more widely available. It can be used
instead.
PAR-38 175W heat lamps can be purchased through the
following retailers:
OpTech Inc: 800-848-6624 or
www.optechlightbulbs.com
bulbs.com: 888-455-2800 or www.bulbs.com
Figure 5: Heat Lamp Replacement
English 7
Tabla de contenido
loading

Este manual también es adecuado para:

Ph30hsPh36hsPh48hsPh36gsPh42gsPh48gs ... Mostrar todo

Tabla de contenido