Tabla de contenido
Idiomas disponibles
Idiomas disponibles
system work, extract full jars. Depending on
the model, the mixing valve can be found in di-
fferent places.
• The unit includes a pressure limiter (PL)
in order to protect the system from excessive
pressure and make it work with consistency
over time.
3. INTERFACE. SYSTEM STATUS.
PJK-260-A + PJK -028 CONTROLLER
VISUAL INDICATION
BLUE LED
"Power"
BLUE LED
"Power"
GREEN LED
"Water quality detector"
GREEN LED
"Water quality detector"
GREEN LED
"Water quality detector"
RED LED
"Leaking sensor/filters"
RED LED
"Leaking sensor/filters"
RED LED
"Leaking sensor/filters"
- Led is off
LED is on: double flashing
x2
* Contact your service.
** When you detect any of the states described
above, contact with the maintenance service to
arrange appointment. See the relevant section in
the Manual Technical.
Contact your service if the unit does not stops pro-
ducing water (after completely filling the tank) after
LED
ACUSTIC
STATE
INDICATION
-
-
-
x1
-
x1
x2
- Led is permanently on
Acoustic signals
several hours, without any water extraction.
Contact your service if the unit blocks repeatedly
due to low water pressure and having pressure
water on the rest of the house.
Contact your service if , after opening the faucet,
the unit would find at rest, without dispensing water
using the tap or showing any alarm.
43
PUSH
BUTTON
Electrically powered system.
-
The electric/electronic system is not wor king
-
properly/has failed.
When the PUSH-button on the front panel is
pressed, it indicates that the quality of water
produced is excellent.
When the PUSH-button on the front panel is
pressed, it indicates that the quality of water
produced is poor.
The system is working properly. If it doesn't li-
-
ght up after pressing the PUSH-button on the
front panel, it means that another alarm of a
higher priority has lit up.
Carry out the maintenance/change the filters
-
immediately. System blocked. *
A water leak has been detected. System bloc-
-
ked. *
Carry out the maintenance/change the filters
-
soon. *
LED is on: single flashing
x1
Regular acoustic signal
The beeps are not continuous; they last a few
seconds (10 "). While maintenance state is main-
tained it will be indicated by LEDs on the panel and
acoustic notification periodically every 7 hours.
MEANING
Tabla de contenido
