GuTZZI direct flow Manual De Uso página 39

12
Measuring
housing
PREFILTRATION
INLET
• Pay special attention to the disinfection of the tap
spout. Use a sanitising spray (or hydrogen peroxide,
by applying it in such a way that it goes inside the tap)
and disposable kitchen paper towel. Apply the saniti-
sing spray on the tap nozzle (13), rub the spout and the
nozzle with a disposable paper towel and do not touch
it with bare hands (14).
13
MEMBRANE
MEMBRANE
14
39
1
Quality
Probe
MEMBRANE
3. RINSE
• Rinse the appliance after each sanitization by flowing
tap water for 5 minutes or more.
• Proceed to rinse the prefilter each time it's replaced
and prior to the sanitization.
• Rinse the prefilter separately from the rest of the
appliance even before its installation.
• Rinse the appliance with water that complies with
local normative concerning the parameters of potable
water.
• Slowly fill the prefilter in order to evacuate the air con-
tent and avoid internal turbulence wich may after the
different stages of filtration.
• Keep the filter in the same position it is going to be
once installed in the appliance during the entire rinsing
process.
• Dry all the parts that may have got wet using a dis-
posable paper towel, in particular the Aquastop leaking
sensor.
• Since sanitising and rinsing do not guarantee either
the complete removal of carbon dust found in new fil-
ters or sanitising residues, the tank must be emptied
twice before the water can be used as drinking water.
DRAIN