COOKWARE
CHARACTERISTICS
Ceramic
or
•
Follow manufacturer's
instructions.
Ceramic
glass
•
Heats slowly, but unevenly.
•
Ideal results on low to medium heat
settings.
Copper
•
Heats very quickly and evenly.
Earthenware
•
Follow manufacturer's
instructions.
•
Use on low heat settings.
Porcelain
enamel-
•
See stainless steel or cast iron.
on-steel
or cast
iron
Stainless
steel
•
Heats quickly, but unevenly.
•
A core or base of aluminum
or copper on
stainless steel provides even heating.
ELECTRONIC OVEN CONTROL
4
5
.............. MEATS/
S[0W
........................
P_I._Y
CS0*ER.j
COOKIES
PIZZA
J
8
/
/
,S
10
11
12
13
14
15
16
1. RECIPE RECALL
TM
2. Slow Cooker
3. Display
4. Add 1 Minute
5. Timer
6. Cooktop Lockout (on some models)
Cooktop Light (on some models)
7. Oven Light/Oven Lockout
8. Oven Selectors
(SERVE WARM - on some models)
9. Self-Clean
SENS-A-CLEAN
TM
(on some models)
LOGI-CLEAN
TM
(on some models)
SELECT CLEAN
TM
(on some models)
10. Temperature Setting
11. Timed Cooking
!2. Clock
13. Hour
14. Minute
!5. Start
16. Stop/Clear
When power is first supplied to the appliance, make sure the
surface burners are in the OFF position. Everything on the display
will light up for 5 seconds. Then the time, "PF" will appear on the
display.
If "PF" appears at any other time, a power failure has occurred.
To remove "PF" and to reset the clock, press STOP/CLEAR.
When the oven is in use, this display shows time, temperature
and what command pads have been pressed.
When the oven is not in use, the display will show the time of day.
The START pad begins any function. If not touched after touching
a pad, "START?" will appear in the display.
If cooking is interrupted, touching START will resume the preset
cycle.
The STOP/CLEAR pad stops any oven function except for the
Clock, Timer and Cooktop or Oven Lockouts.
After pressing STOP/CLEAR, the display will show the time of
day or, if the minute timer is also being used, the time remaining.