Resetting Thermal Protection - Waring Commercial NuBlend BB185 Manual Del Usario

13. Your blender utilizes a removable jar base and blade
assembly; to avoid injury, never place cutting assembly
or cutting blades on base without container properly
attached.
14. Always operate blender with cover in place.
15. When blending hot liquids, remove centerpiece of two-
piece cover. See Hot Blending Instructions.
SAVE THESE INSTRUCTIONS

RESETTING THERMAL PROTECTION

• The Blender you have purchased is equipped with an
Automatic Reset Switch to protect the motor from
overheating.
• If your blender stops running under heavy use, turn the
Power Switch "Off" and Unplug the Power Cord. Empty the
blender container of all its contents and allow approximately
5 minutes for the motor to cool down.
• Plug the power Cord back into the outlet and continue
blending.
• If your blender does not function properly following this
procedure, discontinue use and contact a Certified Waring
Customer Service Center.