99641511_A_MULTI.qxp
EN
4 / CARING FOR AND CLEANING YOUR OVEN
• •
PERFORM A PYROLYSIS (PYROLYSIS MODEL: DOP740*)
•Immediate pyrolysis
Warning
Remove the grids and trays from the
oven and clean any major spill residue.
- - Check that the programmer is displaying the
time of day and that it is not flashing.
You can choose 3 durations of pyrolysis:
pyrolysis lasting 1 hour 30 minutes.
pyrolysis lasting 1 hour 45 minutes.
pyrolysis lasting 2 hours.
Press the
touch button (fig.1).
Then press once on the button - to get the
symbol "P P " flashing in the display (fig.2).
Confirm by pressing the button OK.
The pyrolysis cycle display shows a duration
of 2:00 hours, but you can change this
duration.
Example: pyrolysis cycle 1h45.
Press the + or - button to get the desired
duration (fig.3).
Confirm by pressing the button OK.
Pyrolysis starts and the symbol
flashing, becomes steady. The countdown of
the cooking time begins immediately after it
has been set.
During the pyrolysis, the symbol
in the programmer indicating that the door is
locked (fig.4).
At the end of pyrolysis, 0:00 starts flashing as
well as the symbol
- - When the oven is cool, use a damp cloth to
remove the white ashes.
The oven is clean and once again ready for
the cooking cycle of your choice.
20/03/2007
12:12
Page 74
stops
displays
.
74
fig.1
fig.2
fig.3
fig.4