Operation: Processing Jobs; Starting Jobs; Aborting Milling - Ivoclar digital PrograMill Dry Instrucciones De Uso

PrograMill Dry – Operation: Processing jobs
7 Operation: Processing
jobs
You control and start manufacturing with PrograMill
CNC. In this chapter, we will give you a brief overview.
For the complete instructions, see the documentation
for PrograMill CNC.
NOTICE
Damaging of the machine when using damaged tools
or materials
If tools or materials are damaged, parts can break off
and damage the machine during job execution.
Check the materials and tools thoroughly for dam-
age before every job execution.
When you have prepared your jobs and your machine,
you can start machining. Machining is a fully auto-
mated process and only requires your attention in case
of unexpected events.
Do not move the machine during job execution,
otherwise the results may become imprecise.

Starting jobs

1. Ensure the following:
You created a job on your CAM computer. It
n
has been transferred to PrograMill CNC.
All required tools are in the right positions in
n
the tool magazine and are neither worn nor
damaged. They have also been added to
the virtual tool magazine in PrograMill CNC.
The required materials are mounted.
n
The compressed air supply is set correctly.
n
2. Close the working chamber door.
3. If you manually control the suction device, switch
it on and set it to the required level.
4. Start machining via the depicted icon in
PrograMill CNC.

Aborting milling

You can abort machining as follows:
Operating Instructions: PrograMill Dry Version: 2/19/2021
1. Select the depicted icon.
2. Confirm the current message.
The following happens:
a. Machining stops immediately.
b. You are prompted to select whether the tool
in the spindle can be inserted safely into the
tool magazine.
3. If you want the machine to automatically put the
tool into the tool magazine, confirm the dialog. If
you want to remove the tool manually from the col-
let chuck, answer the question in the negative.
Removing the tool manually is necessary
in case that putting it into the tool
magazine would damage the tool
magazine inserts.
Depending on your choice, the spindle either puts
the tool into the tool magazine or moves into the
tool change position. In the latter case, continue
with the next step.
CAUTION
Danger of cuts and burns when touching tools
with your bare hands
If you handle tools on the cutting surface, you may
be injured. As the tool may be very hot, you may
also suffer from skin burns.
Only touch tools at their shank.
When handling tools, wear protective gloves.
4. Open the working chamber door.
5. Hold the tool in the collet chuck in place.
6. Confirm the current message.
The following happens:
a. The collet chuck opens.
b. The current dialog window closes.
c. A dialog window opens.
7. Remove the tool from the collet chuck.
EN 25