Switching Off The Machine; Mounting And Removing Materials; Mounting Discs In The Working Chamber - Ivoclar digital PrograMill Dry Instrucciones De Uso

PrograMill Dry – Operation: Preparing jobs
F . 16 – R
IG EMOVING THE TOOL FROM THE COLLET
CHUCK
6. Confirm the current message.
The machine is ready for operation.

Switching off the machine

DANGER
Danger of an electric shock if unplugging the power
cable before switching off the machine
If you unplug the power cable while the main power
switch is still in "ON" position, residual voltage in the
power cable may cause you to suffer from an electric
shock.
Before unplugging the power cable, switch off the
machine at the main power switch.
To switch off the machine, do the following:
1. Ensure that the working chamber is clean.
2. Switch off the machine at the main power switch.
3. (Optional) Unplug the power cable.
4. (Optional) Switch off the main power switch of
your workstation / facility.

Mounting and removing materials

The machine can process the following materials:
How to mount the different material types

Mounting discs in the working chamber

F
Operating Instructions: PrograMill Dry Version: 2/19/2021
Discs with a diameter of 98.5 mm – 98.8 mm
n
You can obtain extra equipment from your
service partner.
For the Ivotion Denture System material, there
is an additional Ivotion Denture material holder
available. The Ivotoin Denture System allows
you to fabricate customized complete dentures
in only one milling procedure.
Material Additional holder
type required?
Discs No
1. Open the working chamber door.
2. Unlock the material holder by pulling the left and /
or right material holder lever (marked orange in
the figure) towards yourself into the end position.
The material holder cover moves upwards and
the material holder opens.
. 17 – O
IG PENING THE MATERIAL HOLDER
3. Remove material from the material holder if any.
EN 21
How to mount
Discs >>
material holder