Proper Use - Trumpf S 250-4 Manual Del Usuario

GB
5 Eccentric shaft
15 Ram
19 Adjusting screw
20 Top cutter and bottom
cutter
21 Fastening screw for the
top cutter
23 Fastening screw for the
bottom cutter
24 Fixed blade carrier
25 Chip deflector
127 "On"/"off" switch
Hand shears S250-4
S 250-4 specifications
Max. material thickness:
• Steel up to 400 N/mm²
• Steel up to 600 N/mm²
• Steel up to 800 N/mm²
• Aluminium 250 N/mm²
Smallest radius for curve-shaped cutouts
Working speed
Nominal power consumption
Number of strokes under maximum load
Weight
Protective insulation
8
GB
5
5
1
20
20
2.5 mm
2.0 mm
1.5 mm
3.0 mm
20 mm
5-7 m/min
500 W
1600/min
2.3 kg
Class II
S 250 - 4
24
19
23
Noise / Vibration
Measured values established in acc. with EN 50 144.
The A-weighted sound level of the unit is typically
84 dB (A). The noise level can exceed 85 dB (A)
during operation.
Wear ear protection!
The hand-arm vibration is typically lower than
2
2.5 m/s .

Proper use

The TRUMPF hand shears S250-4 are an electrically
operated hand machine used to
• part plate-shaped workpieces made of material
such as aluminium, non-ferrous heavy metal and
plastic
• cut straight or curved outer edges and inside
cutouts
• cut along a scribed line
127
25
Fig. 25717
E407.doc