Connection - De Dietrich DTI1089V Manual De Instalació Y Utilización

1 / INSTALLING YOUR APPLIANCE

Connection

These hobs must be connected to the mains using a socket in compliance with publication CEI
60083 or an all-pole circuit-breaker device in compliance with the installation rules in force.
When power is first supplied to your hob, or after an extended power cut, an indicator light will
appear on the control panel. This information will disappear after 30 seconds.
• 220-240V
~
Blue
Brown
N
32A
Neutral
Warning
If the cable is damaged it must be replaced by the manufacturer, its after-sales
service or a person with a similar qualification to prevent danger.
Black or grey
Green/yellow
L
Phase Earth
• 400V 2N - 16A
~
Separate the 2 phase wires (L1 and L2) before
connection.
Brown
Blue
N
Neutral
With hook-up of 400 V 2N three phase, verify
that the neutral wire is properly connected.
5
Black-grey
Green/yellow
L1 L2
Phase Earth
EN