Description Of Symbols - Silverline 253162 Manual Del Usuario

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Caution!
Conforms to relevant legislation and safety standards
1105
Notified body number
Carefully read and understand these instructions and any label attached to the tool before
use. Keep these instructions with the product for future reference. Ensure all persons who use this
product are fully acquainted with these instructions.
Specification
Model:....................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . .253162
Applicable standards:................ . . . . . . EN 354:2010 (Fall protection lanyards)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 362:2004/B (Karabiners)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 362:2004/A (Scaffold hook)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 355:2002 (Energy absorbers)
. . . . . . . . . . . . . . . . . EN 365:2004 (Fall arrest equipment general requirements)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2016/425/EU
Material:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Karabiner: steel grade 35CrMo
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scaffold hook: steel grade C45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rope: Polyester
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thimble: Polyethylene
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Absorber: Polyester
Maximum strength: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25kN
Temperature range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to +80°C
Gate opening Screwgate karabiner: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19mm
Scaffold hook: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56mm
Dimensions
(max working length x rope diameter): . . . . . . . . . . . . . . . . . . . . . . . . 1770 x 14mm
Net weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.13kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
6
Original Instructions
Safety Instructions for Height Safety
Equipment
WARNING: Activities involving the use of this equipment are inherently dangerous. ALWAYS
carry out a risk assessment before work commences, including rescue arrangements.
WARNING: Specific training is essential before using this equipment. It must only be used by
competent and responsible individuals, taking care not exceeding the limitations of the equipment.
WARNING: Failure to adhere to any warnings and recommendations given in these
instructions, may result in severe injury or even death! When using this equipment you personally
assume all risks and responsibilities for all damage, injury or death which may occur during or
following incorrect use of this equipment. You are responsible for your own actions and decisions. If
you are unable, or not in a position to assume this responsibility or to accept these risks, DO
NOT USE THIS EQUIPMENT.
a) NEVER use equipment that has exceeded its shelf and/or service life.
b) This product MUST NOT be stressed beyond its strength rating.
c) DO NOT use components of fall arrest gear outside its limitations, or for applications
which they were not specifically designed for.
d) Avoid impacts and rubbing against abrasive surfaces during use, transport and storage.
e) DO NOT use connectors with manual locking mechanisms in areas where they are
frequently opened and closed.
f) Ensure locking mechanisms and safety devices engage securely and connectors are fully
closed and locked before use.
g) NEVER combine components that are not recommended by the manufacturer as being
compatible. One item may interfere with the safe function of another, jeopardising the function
of the system as a whole.
h) NEVER attach a fall arrest system to an anchorage if you are unsure about the strength
and condition of the anchorage.
i) Take into account the length of every single component of a fall arrest system, including
the connectors, when determining the total length of the system.
j) The clearance under the user must be sufficient to prevent them from striking an obstacle
in the event of a fall.
k) DO NOT allow any part of a fall arrest, work positioning or restraint system to come into
contact with sharp edges or abrasive surfaces during use. Reposition if necessary or choose
an alternative anchorage.
l) Any component of a fall arrest system must be individually inspected according to the
manufacturer's recommendations and procedures. After assembly, the system must be
inspected as a functional unit.
m) Any kind of repair or modification of this equipment is strictly PROHIBITED.
n) DO NOT tie knots in harnesses, lanyards and ropes. DO NOT allow equipment to become
tangled.
o) Equipment that has been exposed to extreme conditions, failed an inspection or has been
used to arrest a fall must be retired and destroyed. Never expose items made with synthetic
fibre components to direct flames.
p) DO NOT use shock absorbers that have been partially deployed, or when the plastic sheath is
damaged.
q) Destroy retired equipment immediately, to prevent further use.
r) All users of fall arrest gear must be medically fit for activities at height and must wear
appropriate personal protective equipment for the environment, work carried out and
tools used.
s) Carry out a risk assessment for every activity, and define a rescue plan that can be safely and
rapidly executed in case of emergency.
t) All product markings must remain intact and clearly legible for the entire service life of
this equipment.
u) Store the equipment with its dedicated service record and usage
uncertain service history must be removed from service and destroyed.
v) Before using this equipment, ensure that it complies with local federal regulations and
other applicable safety standards.
w) Textile products including webbing and ropes MUST NOT be marked using ink from
marker pens or paint, as these substances may potentially lead to chemical damage of the
material.
x) Store in accordance with the manufacturer's instructions.
instructions.
Gear with