Sound Level Indicator; Ringer Controls; Ringer Volume Control; Visual Ringer - Clarity W1000 Guia Del Usuario

➤ Sound Level Indicator

This LED signal indicates if there is
speech or sound present on the line. It will
be bright and steady when a dial tone is
present. It will flash in rhythm with a busy
signal and will flicker when the person on
the other end is speaking. This feature is
designed to assist those individuals with a
more profound hearing loss.

➤ Ringer Controls

The Clarity W1000 comes with a Special
Low-Frequency Ringer designed to be
easily heard by everyone.
The ringer also comes with a volume
and pitch adjustment, allowing it to be
tailored to each user.
The ringer Volume Control has three
settings: OFF, LOW, and HIGH. It is
suggested that you set the volume control
For Low Frequency,
Loud Ring
Volume
Look On Right
Edge of Case
CLARITY W1000 FEATURES
Pitch
to high when you first start using your
Clarity telephone. To do this, slide the
ringer volume control toward the largest
dot.
The ringer also has a Pitch Control that
has three settings: LOW, MED, and HIGH.
The low frequency is typically the easiest
for people with partial hearing loss to hear.
It is suggested that you set the pitch con-
trol to low (the smallest dot) when you
start using the phone.

➤ Visual Ringer

A lighted ringer works in conjunction with
the low frequency ringer. It sends out a
visual flashing alert every time a phone
call is coming in. (This ringer will light up
regardless of the setting on the ringer
volume control.)

➤ Tone/Pulse Selection

The Clarity W1000 can be used as either a
TONE (touch dial) or PULSE (rotary dial)
phone. Tone dialing is required for using
special phone services such as long
distance calling. Please check with your
local phone company on certain types
of service.
Note for Users with Pulse/Rotary ser-
vice only: Many automated answering
systems used by banks, stores and gov-
ernment agencies ask you to "Push 1 for
service", "Push 2 for the operator", etc.
E
N
G
L
I
S
H
13