ResMed AirMini Manual Del Usuario página 21

Problem/possible cause
I cannot start therapy
Power may not be connected.
My therapy has stopped
The air tubing may be disconnected.
You may have high leak and SmartStop
enabled.
The Bluetooth indicator light is constantly white. I cannot pair to my machine
Bluetooth is disabled.
I cannot scan the QR code to pair my machine
The camera is not focused or broken, or
the QR code label is damaged.
The QR code label is unreadable.
Solution
Connect the power supply unit and make
sure the plug is fully inserted. The green
indicator light on the power supply unit
should be illuminated.
Check that the green indicator light above
the Start/Stop button on the machine is
also illuminated.
Ensure that the air tubing is properly
connected. Press the Start/Stop button to
continue therapy.
Make sure your mask is fitted correctly.
Alternatively, disable SmartStop.
Press the Bluetooth button for 3 seconds.
When the Bluetooth indicator light flashes
blue, the machine is ready for pairing.
You can pair your machine manually by
entering into your smart device the four-
digit key found on the back of your
machine.
Contact your care provider.
English 19