Hands And Body Position - HOLZMANN MASCHINEN TK 305 Manual De Intrucciones

Remark: The "circular pan" rotate angle are between to left /
right sides of 45°~0° ~ -45°.
6. Press the "cutting head".
7. Cutting the board until it to separate
8. Loosen the trigger of the mitre, until it slowly to rise.
9. Release your hand.
15.3.4

Hands and body position

Never place hands within the "NO HANDS ZONE" (at least
140mm away from each side of the blade). Pictograms on
the machines rotary table are provided as an aid to safe
working practices.
Keep hands away from the path of the blade. Hold the
workpiece firmly to the fence to prevent any movement. Use
a "Hold down Clamp" if possible but check that it is
positioned that it does not interfere with the path of the
blade or other moving machine parts.
Always the saw to do the cutting; never force the saw as this could
result in damage to the saw and / or injury to the operator or those
in the area.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O T I C E
OPERATION
44
TK 305