= STANDARD LU-VE
Abcdefg
standard
OUTPUT SIGNALS
On request
EMC integrated mains filter
PROTECTION
SURGE arrester protection
Materials
Protection Degree
CASEMENT
Heatsink temperature
Environmental pollution
Fire Resistance Category
Insulating parts Electric stress
casement
INSULATION
Control circuit
Working temperature
Storing temperature
ENVIROMENTAL
CONDITIONS
Vibrations Lower
Caratteristica di Invecchiamento
INSTALLATION
Wall mounted-only in vertical position with N° 4 holes Ø 5 mm,free space above and below the regulator about 100 mm
The device is suitable for the installation in units of class I, II, III.
Mod. / Type
Amp
SCU 08
SCU 12
SCU 16
SCU 20
Technical Characteristics
V1
Aux.power supply
V2
Aux.power supply
Config. 0M
+ 10 V
Aux.power supply
OUT
Output signal for Power unit : 0-10V o PWM (Max 5 modules)
V1
Aux.power supply
V2
Aux.power supply
Config. 0X
+ 10 V
Aux.power supply
OUT
Output signal for Power unit : 0-10V o PWM (Max 5 modules)
V1
Aux.power supply
V2
Aux.power supply
Config. 0V
+ 10 V
Aux.power supply
OUT
Output signal for Power unit : 0-10V o PWM (Max 5 modules)
V1
Aux.power supply
V2
Aux.power supply
Config. 0B
+ 10 V
Aux.power supply
OUT
Output signal for Power unit : 0-10V o PWM (Max 5 modules)
Secondo EN 61800-3
Secondo EN 61800-3
GW-Plast 120 °C (max. 120 °C) and aluminium
IP 55
IP 00 ( on request )
60 °C
high pollution
Category D
Long time
Class I ( use of the protection cable connected to the ground )
2000 Vac between protection grounding and energized parts of the device
2500Vac between the driving input and energised parts of the device
4000 Vac between the driving input and the parts having the supply voltage
-20 T 50 ( da –20 °C a + 50 °C )
-30 T 85 ( da –30 °C a + 85 °C )
Lower of 1G ( 9.8 m/s2 )
60.000 H
kg
08
1,4
12
1,5
16
1,7
20
1,8
ENGLISH
24 V (+10/-20%) max. 25mA
24 V (+10/-20%) max. 25mA
10,0 V (±1%)
24 V (+10/-20%) max. 25mA
24 V (+10/-20%) max. 25mA
10,0 V (±1%)
5,0 V (±1%)
5,0 V (±1%)
10,0 V (±1%)
22 V (+10/-20%) max. 25mA
5,0 V (±1%)
5,0 V (±1%)
15