2. To insert the battery (4), push the bat-
tery along the guide rail into the de-
vice. You will hear it click into place.
Only insert the rechargeable
battery once the device is
completely assembled. Risk
of injury!
Checking the battery charge
level
The battery's (1) charge level is indicated
by the charge state indicator.
•
The charge level of the battery is
indicated by illumination of the corre-
sponding LED lights while the device is
in operation. Press and hold the power
button to view.
red-yellow-green => Battery fully charged
red and yellow
=> Battery half charged
red
=> Battery needs
Recharging the battery
Charge the battery (1) when only
the red LED on the level indicator is
illuminated.
The charging time is around 1 hour.
1. Remove the battery (1) from the appli-
ance if necessary.
2. Insert the battery (1) in the charging
compartment of the battery charger (3).
3. Plug the battery charger (3) into a
mains outlet.
4. When the battery is fully recharged
unplug the battery charger (3) from the
mains.
to be charged
5. Pull the battery (1)out of the battery
charger (3).
Overview of the LED indicators on
the charger (3):
Green LED (5) lights up with-
out battery inserted:
Charger ready.
Green LED (5) lights up:
Battery such alleged
charged.
Red LED (4) lights up:
Battery charging.
Used batteries
•
If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to be
replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
•
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see "Cleaning and Main-
tenance").
Storage
•
Store the equipment between 10° C
and 40° C. During storage, avoid ex-
treme cold or heat so the battery does
not lose power.
•
Remove the battery before storing the
unit for longer periods of time.
•
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
GB MT
39