Safety Guidelines For Cordless Drill; Safety Guidelines For Battery Chargers; Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PABS 12 B3 Traducción Del Manual De Instrucciones Original

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Safety guidelines for cordless drill

WARNING!
Hold the power tool by the insulated
gripping surfaces when performing an
operation where the screw or attached tool
could come into contact with hidden wiring.
Contact between the screw or attached tool
and a live wire may cause exposed metal
parts of the power tool to become live and
give the operator an electric shock.

Safety guidelines for battery chargers

This appliance may be used by
children aged 8 years and above
and by persons with limited physi-
cal, sensory or mental capabilities
or lack of experience and know-
ledge, provided that they are under
supervision or have been told how
to use the appliance safely and are
aware of the potential risks. Do not
allow children to use the appliance
as a plaything. Cleaning and user
maintenance tasks may not be car-
ried out by children unless they are
supervised.
The charger is suitable for
indoor use only.
WARNING!
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
 │ GB │ MT
42

Before use

Removing/charging/inserting the
battery pack
NOTE
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. You can charge
the lithium-ion battery at any time without
shortening its service life. Interrupting the
charging process does not damage the
battery.
CAUTION!
Always pull out the plug before you remove
the battery pack
battery pack to the charger.
1.) To remove the battery pack
button
and pull the battery pack
the appliance.
2.) Insert the battery pack
charger
.
3.) Insert the power plug into the socket. The control
LED
lights up red.
4.) The green charge status indicator LED
you when the charging process is complete and
the battery pack
5.) Push the battery pack

Checking the battery charge level

If the appliance is switched on, the remaining
charge will be shown on the battery LED
follows:
RED / ORANGE / GREEN = maximum charge
RED / ORANGE = medium charge
RED = low charge – charge the battery
from or connect the
, press the release
out of
into the battery
shows
is ready for operation.
back into the appliance.
as
PABS 12 B3
Tabla de contenido
loading

Tabla de contenido