Safety Guidelines For Cordless Screw Drivers; Safety Guidelines For Battery Chargers; Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PBSA 12 C2 Manual De Instrucciones Original

Safety guidelines for cordless screw
drivers
WARNING!
■
Hold the power tool by the insulated
gripping surfaces, when performing an
operation where the screw or attached tool
could come into contact with hidden wiring.
Contact between the screw or attached tool
and a live wire may cause exposed metal
parts of the power tool to become live and
give the operator an electric shock.
Safety guidelines for battery
chargers
This appliance may be used by chil-
■
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
The charger is suitable for
indoor use only.
WARNING!
■ To avoid potential risks, damaged mains cables
should be replaced by the manufacturer, their
customer service department or a similarly
qualified person.
│ GB │ MT
■ 42

Before use

Removing/charging/inserting the
battery pack
NOTE
► The battery is partially charged. Ideally, fully
charge the battery before use. You can
charge the lithium-ion battery at any time
without shortening its service life. Interrupting
the charging process does not damage the
battery.
CAUTION!
► Always unplug the appliance before you
remove the battery pack
the battery pack to the charger.
1.) To remove the battery pack
release button and pull the battery pack
out of the appliance.
2.) Insert the battery pack
charger .
3.) Insert the power plug into the socket. The red
charge indicator LED
4.) The green charge indicator LED
that the charging process is complete and the
battery pack is ready for use.
5.) Push the battery pack
ance.

Checking the battery charge level

When the appliance is switched on, the remaining
charge will be shown on the battery LED
follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
from or connect
, press the
into the battery
lights up.
indicates
back into the appli-
as
PBSA 12 C2