Overview Of Leds; Installation; Parent Unit - NUK DECT ECO Control + Manual Del Usario

2.5 OVerVieW OF leds

Parent unit

: low battery/charging
Lit steadily when unit is being charged;
flashes when low battery level is detected
: connection
Flashes when there is no connection
between baby and parent units, or if parent
unit is out of range of baby unit
Lit steadily when connected to baby unit;
off during Full Eco mode
: ecO mode
Not displayed when Full Eco mode is OFF;
lit steadily if Full Eco mode is ON

3 INSTALLATION

3.1 parent unit
The parent unit is powered by 2 rechargeable batteries which are supplied with the
unit. These batteries should be charged using the power adapter supplied.
1. Remove the battery compartment cover (Fig. 1).
2. Insert 2 x AAA rechargeable batteries into the battery compartment
on the parent unit, taking care to observe their polarities (Fig. 2).
3. Replace the battery compartment cover (Fig. 3).
4. Connect the output plug of the mains adapter to the DC socket on
the side of the parent unit and connect the mains adapter to the
mains power supply at the wall (Fig. 4).
5. The Low Battery/Charging LED (
ing will begin.
6. When the battery icon in the LCD display is lit steadily, the batteries are
fully charged (
NOTE:
If no batteries are inserted into the parent unit, the unit can still be powered by con-
necting the device to the mains power supply.
Please always use the correct type of batteries: NiMh AAA 1.2 Volts max. 750mAh.
UK Babyphone 10.256.267 (BM-200).indb 31
attentiOn:
neVer install normal batteries in the parent unit.
normal batteries cannot be recharged and
will damage the parent unit when charged.
) (Fig. 5).
Baby unit
: power
Displayed when parent unit
is switched on; hidden when
parent unit is switched off
: low battery
Flashes when low battery
level is detected
) will be displayed and charg-
31
17.12.2009 14:09:5