Range; Full Eco Mode - NUK DECT ECO Control + Manual Del Usario

The volume of these alerts is fixed. If the volume of the parent unit is set to OFF,
the volume will be set to ON and will remain on during paging.

5.14 range

If your baby is nearby, you may decide to reduce the transmission power to cause
less radiation.
The effective range will depend on your specific circumstances.

5.15 Full ecO mOde

When the Full Eco mode is activated, there will be no high frequency radiation at
all between the baby and parent units when the baby is quiet.
2x
NOTE:
1. Playing a lullaby will temporarily disable the Full Eco mode if the Full Eco
mode has been enabled. Once lullaby playback has been stopped, Full Eco
mode will resume.
2. The connection check is not active in Full Eco mode. The connection LED
3. Eco Mode should be set when the receiver remains within the operating
range. When moving out of the operating range, no warning signal alarm will
be sounded.
Please observe that the parent unit must be within the range of the baby unit to
establish a connection between both devices.
UK Babyphone 10.256.267 (BM-200).indb 42
Press the menu button (Fig. 24).
Select the [ RANGE ] option.
Press the menu button.
Depending on the present setting, when you now press the MENU
button you will set the Babyphone to [ hALF RANGE? ] or [ FULL
RANGE? ] mode.
Press the menu button (Fig. 25).
Select the [ FULL ECO ] option.
Press the menu button twice. If the Full Eco mode is currently OFF, it
will now be set to ON; if the Full Eco mode is currently ON, it will now
be set to OFF.
will therefore not light when this mode is selected.
42
17.12.2009 14:09:5