Safety Definitions; General Safety Instructions; Vibration Safety; Safety - Husqvarna 150BT Mark II Manual De Usuario

Ocultar thumbs Ver también para 150BT Mark II:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 117
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.

Safety definitions

The definitions below give the level of severity for each
signal word.
WARNING:
CAUTION:
Note:
This information makes the product easier to
use.

General safety instructions

WARNING:
instructions that follow before you use the
product.
Do not do changes to the product without approval
from the manufacturer and always use original
accessories. Modifications and/or accessories that
are not approved can result in serious injury or the
death of the operator or others.
Do not use a damaged product. Do the safety
checks and maintenance given in this operator's
manual. All other maintenance must be done by
approved servicing personnel.
All servicing and repair operations must be done by
approved servicing personnel. If a part of the product
is defective, speak to your servicing dealer.

Vibration safety

This product is for occasional operation only.
Continuous or regular operation of the product can
cause "white finger" or equivalent medical problems
from vibrations. Examine the condition of your hands
and fingers if you operate the product continuously or
regularly. If your hands or fingers have discoloration,
have pain, tingle, or are numb, stop work and speak to a
physician immediately.
4
Injury to persons.
Damage to the product.
Read the warning
the product is not repaired at an approved service
center or by an approved authority.

Safety

Safety instructions for operation

WARNING:
instructions that follow before you use the
product.
This product can be dangerous and cause serious
injury or death to the operator or others. Be careful
and use the product correctly.
Do an inspection of the product before use. Refer to
Maintenance on page 11 .
Do not operate the product when you are tired, ill or
under the influence of alcohol or other drugs that can
decrease your vision, judgment or coordination.
Install all covers and guards before use. To prevent
electrical shock, make sure that the spark plug cap
and ignition cable are not damaged.
Do not touch the spark plug or ignition cable when
the engine is on.
Keep a safety distance at a minimum of 15 m to
persons or animals. If persons, children or animals
come nearer than 15 m, stop the product. Point the
product away from persons, animals, open windows
and other objects.
Do not let children operate the product. Make sure
that all operators read and understand the contents
of this operator's manual.
Keep hands or other objects away from the blower
housing during operation. Rotating parts can cause
serious injury.
Do not use the product if the air intake screen is not
installed. Always make sure that the air intake
screen is installed and not damaged before use.
If an emergency occurs, release the waist belt and
chest belt of the harness and let the product fall.
Obey national regulations and directives.
Keep all body parts away from hot surfaces.
Too much vibration can cause damage to the
circulation or the nervous system. Speak to your
physician if you have symptoms, for example
numbness, loss of feeling, tingling, pricking, pain,
loss of strength or changes in skin color in your
fingers, hands or wrists.
Look out for thrown objects. Thrown objects can
cause serious injury.
Do not use the product in bad weather, for example
fog, rain, strong winds and too cold environments.
To do work in bad weather can cause tiredness and
dangerous conditions.
Read the warning
1456 - 002 - 06.05.2021
Tabla de contenido
loading

Tabla de contenido