Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Complete Installation
1. Refer to the "Make Gas Connection" section for properly connecting the range to the gas supply.
2. Refer to the "Electronic Ignition System" section for proper burner ignition, operation, and burner flame adjustments.
IMPORTANT: You may have to adjust the "LO" setting for each range burner.
Checking for proper range burner flame is very important. The small inner cone should have a very distinct blue flame
1/4" (6.4 mm) to 1/2" (1.3 cm) long. The outer cone is not as distinct as the inner cone. Propane gas flames have a slightly yellow
tip.
3. Refer to "Complete Installation" in the "Installation Instructions" section of this manual to complete this procedure.
20
Tabla de contenido
