Electrical Wiring Diagram - LUCCI WHITEHAVEN Manual De Instrucciones De Instalación

Whitehaven Fan Installation Instructions
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED
ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED WIRING.
NOTE: IF THERE ARE TWO OR MORE DC CEILING FANS INSTALLED IN THE ONE LOCATION, AN SINGLE-POLE
SWITCH IS REQUIRED FOR EACH CEILING FAN. THIS IS REQUIRED WHEN PROGRAMMING THE REMOTE AND
RECEIVER TO PAIR TOGETHER.
Wiring requirement at the terminal block:

Connect the household live supply wire to the "L" terminal of the terminal block on the mounting bracket.

Connect the household neutral supply wire to "N" terminal of the terminal block on the mounting bracket.

Earth to " " terminal of the terminal block on the mounting bracket.

Insert the DC motor driver into the mounting bracket as figure show.

Connect the fixed wire from the mounting bracket to the input wire of the DC motor driver via 4-port quick connectors
(1).

Connect the motor output wire of the DC motor driver to the input wire of the fan via 4-port quick connectors (2).

Connect the light output wire of the DC motor driver to the input wire of the light kit via 2-port quick connectors (3).
7 | P a g e

ELECTRICAL WIRING DIAGRAM

Fig. 8