Electrical Wiring Diagram - LUCCI BOREAS Serie Manual De Instrucciones De Instalación

4. Connect the quick connector (2, Fig.6), and then push them into the switch housing (1, Fig.6).
5. Attached the light kit to light base and align the screw holes, then secure light kit with 3 light kit
screws.
6. Insert and secure the light bulbs into the E27 sockets. (Bulb not included)
7. Carefully place the glass shade cover over the lamp and secure it by the three spring clips.
Fig.7
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY
A LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE
FIXED WIRING.

ELECTRICAL WIRING DIAGRAM

Fig. 6
7