Tornado 93282 Manual De Operaciones Y Mantenimiento página 8

• Fit the wand to the floor tool (Fig 3)
Fig 3
Controls
• The on off switch is positioned at the rear of the
machine (Fig 4).
Fig 4
• To turn the machine on press the button.
• To switch off the machine press the button again
* When operating the unit in a noise sensitive
area, the unit may be adjusted with the knob on
the right rear of the unit (Fig 4). This will also
decrease the suction power.
Operation
Starting the machine
• Ensure cable is fully extended before use.
• Ensure a dust bag is fitted before use.
• Press the on/off button to turn the vacuum
cleaner on.
• Suction can be adjusted by sliding the airflow
adjuster located on the hose handle (Fig 5).
Fig 5
• For maximum suction keep the adjuster closed.
• After you finish cleaning, turn the vacuum clean-
er off by pressing the ON/OFF button.
• Only then unplug from the power socket.
Using the floor tool
• The floor tool can be used for cleaning carpets
and hard floors. The floor heads pedal should be
down when cleaning hard floors (Fig 6) and in the
up position when cleaning carpets (Fig 7).
Storage
• Always unplug the machine after use.
• After use check the bag. If full, replace the bag.
• Wind the supply cord ensuring that the plug is
not trailing on the floor.
• Store the machine in a dry indoor area only.
Maintenance
WARNING - Before undertaking mainte-
nance operations or adjustments switch
off machine and unplug from the electricity
supply.
The machine requires minimum maintenance
apart from the following checks by the operator.
• Supply cord - Regularly inspect sheath, plug
and cord anchorage for damage or loose connec-
tion.
• Body of the vacuum – Clean with a damp cloth.
• Vacuum filter – Check the vacuum filters, clean
and replace as appropriate.
• Hose, wand and vacuum accessories – Check
and remove any debris or lint build-up from the
head.
8
Fig 6
Fig 7