Operate; Operating Your Pet Door - Petsafe SmartDoor PPA19-15791 Manual De Adiestramiento

.

Operating Your Pet Door

LOCKED Mode – Does not allow entry or exit for any pet. The Pet Door ships from the
factory in LOCKED Mode and when batteries are placed in the Pet Door, it will enter
LOCKED Mode. To set: hold the MODE-RESET button until the red light illuminates and
release when selected.
UNLOCKED Mode – Allows entry and exit for all pets. To set: hold the MODE-RESET
button until the green light illuminates and release when selected.
AUTOMATIC Mode – Allows entry and exit for a pet wearing a programmed
SmartKey Electronic Key; up to five SmartKey
™
into one SmartDoor
mode. To set: hold the MODE-RESET button until the yellow light illuminates and release
when selected.
NOTE: If at any time the red light remains illuminated, replace with a set of fresh
batteries. If that does not reset the red light, please call our Customer Care Centre for
additional help.
Illuminating Color
RED
GREEN
YELLOW
RED, GREEN AND
YELLOW

OPERATE

Electronic Pet Door for selective entry and exit during automatic
™
Condition
Solid only for two seconds after
selecting LOCKED Mode
Flashing
Constant solid
Solid only for two seconds after
selecting UNLOCKED Mode
Flashing
Solid only for two seconds after
selecting AUTOMATIC Mode
Flashing
Flashing at the same time
www.petsafe.net
Electronic Keys can be programmed
™
Pet Door Status
LOCKED Mode
Low battery alert
Internal failure has
occurred
UNLOCKED Mode
Learn Mode
AUTOMATIC Mode
Error alert
Sensitivity Test Mode
17