Appendix: Sil Declaration Of Conformity - WIKA T32. S Serie Manual De Seguridad

Appendix: SIL declaration of conformity

WIKA Alexander Wiegand SE & Co. KG, Alexander Wiegand Straße 30, 63911 Klingenberg declares as
the manufacturer the accuracy of the following information.
1. General information
Permissible options
Safety-relevant output signal
Error current
Evaluated measurands/function
Safety function
Device type per IEC 61508-2:2010
Operating mode
MTTR
MRT
Current hardware version
Current software version (Firmware)
Safety manual
Type of evaluation
Evaluation through Report No.
Test documents
2. Safety Integrity
Systematic capability
Hardware safety integrity
WIKA safety manual temperature transmitter T32.xS
SIL Declaration of Conformity
Functional safety per IEC 61508:2010
T32.1S.xxx-S / T32.3S.xxx-S (xxx = 000/0IS/0NI/0IC)
4 ... 20 mA
Adjustable: ≤ 3.6 mA and ≥ 21.0 mA
(Factory settings: 3.5 mA and 21.5 mA to NAMUR NE43)
Temperature in °C, °F, K, °R
Single sensor
Duplex sensor, Redundant, Minimum value, Maximum value,
Average value
Temperature transmitter: B (complex components)
Temperature sensor: A (elementary components)
Low Demand Mode
8 h
ca. 7.5 h
9
2.2.3 / 2.3.1
Issue 10/2017
Complete evaluation, in parallel with development, of hardware
and software incl. FMEDA on a component level and change
process to IEC 61508-2,3
TÜV Rheinland 968/EL 632.03/17
Safety-Product Requirement Specification
Product Requirements Specification
Functional Safety Management Plan
Product verification plan
Data sheet TE 32.04
FMEDA at component level
Safety manual
SC 3
Single channel operation (HFT = 0, e.g. 1oo1): SIL 2.
Two channel operation SIL 3: to IEC 61508-6 Annex D must
determine a β-factor for the two channel (redundant) application, in
order to incorporate the "Common Cause Failure Probability".
For further information, see WIKA contact data
EN
Page 1/4
17