Charging Error - Fronius Acctiva Smart 25 A Manual De Instrucciones

Charging error

Status codes caused by external factors:
30
31
32
33
34
35
36
82
Cause: Timeout in the corresponding charging phase
Remedy:
- Set Ah to correct value
- Check for parallel consumers (car radio, etc.)
- Battery temperature too high
Cause: Too many Ah charged, too few Ah set
Remedy:
- Set Ah to correct value
- Check for parallel consumers (car radio, etc.)
- Replace battery if it is faulty
Cause: Optional external temperature sensor has tripped due to undertempera-
ture
Remedy:
- Charge the battery in an area with a more suitable temperature
Cause: Optional external temperature sensor has tripped due to overtempera-
ture protection
Remedy:
- Allow battery to cool or charge it in an area with a more suitable tempera-
ture
Cause: Battery voltage set too high
Remedy:
- Set the correct battery voltage
Cause: Voltage below target voltage after 2 h - "Refresh" mode in analysis
phase
Remedy:
- Check for parallel consumers (car radio, etc.)
- Replace battery if it is faulty
Cause: Cell short circuit
Remedy:
- Check for parallel consumers (car radio, etc.)
- Replace battery if it is faulty
Battery overvoltage
Remedy:
- Set the correct operating mode and
voltage