Interrupting Buffering Mode; Resuming Buffering - Fronius Acctiva Smart 25 A Manual De Instrucciones

Ocultar thumbs Ver también para Acctiva Smart 25 A:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 171
If the battery voltage selection window does not open, then the battery is in a state of
extreme deep-discharge (less than 2 V). In this case, buffering is not permitted. We
recommend that the battery is replaced.
Danger following ignition of oxyhydrogen caused by sparks resulting from the
charging leads being disconnected too soon.
This can result in serious injury and damage to property.
7
Interrupting Buf-
NOTE!
fering mode
Danger from disconnecting or unplugging the charging leads during buffering.
This can result in damage to connection sockets and connecting plugs.
Resuming buffe-
ring
68
Set the correct battery voltage using the Up/Down keys (6V /
4
12V / 24V).
Confirm the selection using the Stop/Start key
5
WARNING!
Before disconnecting the charging leads, press the Stop/Start button to finish buffe-
ring.
To cancel Buffering mode:
6
-
Disconnect the charger
-
Disconnect the black charging lead from the negative pole (-) of the battery
-
Disconnect the red charging lead from the positive pole (+) on the battery
Do not disconnect or unplug charging leads while buffering.
Press the Stop/Start key during buffering
1
-
Press the Stop/Start key
2
-
Press the Stop/Start key
The charging process is interrupted
Buffering is resumed
Tabla de contenido
loading

Este manual también es adecuado para:

Acctiva professional 35 a

Tabla de contenido