Heating Beverages With Steam - Beem Espresso Perfect Crema Plus Manual De Instrucciones

Heating beverages with steam

The hot steam generated with the appliance can be used to heat
milk, beverages and tea water.
WARNING
Risk of burns from discharged steam and hot appliance
parts!
Keep your body away from the discharging steam.
►
Touch only the plastic part of the steam nozzle. The metal
►
tube becomes very hot during steam discharge.
Proceed as follows to heat beverages:
Carry out the steps described in chapter
‹
milk|Preparations.
Position the steam nozzle (15) of the appliance so that the
‹
steam nozzle can protrude into the vessel with the beverage
to be heated.
Immerse the steam nozzle completely in the vessel and turn
‹
the selector switch (4) to position
emerge from the nozzle. The hot steam heats up the liquid in
the vessel.
NOTE
►
When the beverage has reached the desired temperature, turn
‹
the selector switch (4) to the middle position
vessel from under the nozzle.
Clean the steam nozzle and the metal tube immediately after
‹
use to prevent deposits and clogging of the steam nozzle.
Instructions for cleaning can be found in chapter Cleaning the
steam nozzle.
NOTE
When steam generation is switched off, the appliance
►
discharges excess water into the drip tray.
BEEM - Elements of Lifestyle
Move the vessel in circles during the steam discharge to
achieve quicker heating.
Preparation
Preparing foamed
to allow the steam to
and remove the
EN
59