Electrical Connection - Beem Espresso Perfect Crema Plus Manual De Instrucciones

Ocultar thumbs Ver también para Espresso Perfect Crema Plus:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Commissioning

Electrical connection

EN
48
For safe and trouble-free operation of the appliance, the following
instructions have to be observed for the electrical connection:
Before connecting the appliance, compare the connection data
(voltage and frequency) on the rating plate with those of your
mains power supply. The data have to correspond in order to
avoid damage to the appliance. If in doubt, ask your electrical
appliance dealer.
The plug socket must be protected by at least a 10 A circuit
breaker.
If the appliance is to be connected to the power supply via an
extension lead, the cable cross-section must be at least 1.5
mm².
Ensure that the connecting lead is undamaged and is not laid
over hot surfaces or sharp edges.
The connecting lead must not be strained, kinked or come into
contact with the hot appliance or hot surfaces.
Lay the connecting lead in such a way that it does not pose a
tripping hazard.
The
electrical safety of the appliance is only assured when it is
connected to a properly installed protective earth (PE) conductor
system. Connection to a plug socket without PE conductor is
forbidden. If in doubt, have the house installation checked by a
qualified electrician. The manufacturer assumes no liability for
injury or damage caused by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

W1.001

Tabla de contenido