Making Coffee With A Preset Time; Deactivating The Preset Time - Beem Basic Selection Manual De Instrucciones

33
At the end of the brewing process, the device switches off automatically. The operating status
indicator
If the keep-hot function has been switched on beforehand, the device remains in opera-
tion for up to 40 minutes and the operating status indicator
fl ashes on the display as long as the keep-hot function is switched on. More informa-
tion can be found in the "Handling and Operation" chapter – "Keep-Hot Function".

Making Coffee with a Preset Time

To make coffee with a preset time, the clock needs to be set (see the "Handling and
Operation" chapter – "Time").
1. Prepare the coffee machine, add coffee beans or coffee powder, pour in water, insert a
fi lter and if necessary activate the aroma button and / or the keep-hot function (see the
"Handling and Operation" chapter).
2. Keep the button
indicator
3. Use the buttons
dling and Operation" chapter – "Time").
4. To make coffee with coffee powder, press the button
status indicator
To make coffee with coffee beans, the button
ating status indicator
indicator
5. To activate the preset time, press the button
lights up constantly. The preset time is activated.
Once the preset time is reached, the device switches on automatically. The display
the programmed settings and
(18) or lights up.
If the operating status indicator
not yet been completed, press the button
ating status indicator

Deactivating the Preset Time

To deactivate the preset time setting, press the
indicator
retained and can be reactivated at any time until a new preset time is programmed in or the
device has been disconnected from the power supply for more than a minute.
02049_DE-EN-FR-ES-IT_A5_V4.indb 33 02049_DE-EN-FR-ES-IT_A5_V4.indb 33
goes out and goes out on the display.
(27) pressed down for approx. 3 seconds until the operating status
fl ashes.
(22) and
is still fl ashing. The operating status indicator
is lit up, press the button
goes out.
. Depending on the setting, the operating status indicator
fl ashes again and the settings can be resumed.
goes out and the programming is deactivated. However, the preset time is
(21) to set the start time you want (see the "Han-
(20) while the operating
must be switched off. If the oper-
again. The operating status indicator
should stop fl ashing even though the setting has
again for around 3 seconds. The oper-
button (27). The operating status
EN
continues to be lit.
lights up.
until the operating status
(19) shows
24.09.2018 15:51:09 24.09.2018 15:51:09