Installation - THERMEx VERTICAL 260 Instrucciones De Montaje

M 540231261206082018

INSTALLATION

The Vertical 260 is available with an internal motor. The range hood can either vent exhaust
out into the open air or re-circulate the air.
Follow the instructions in this guide that match the model that you have purchased and the
way in which you wish to install the exhaust outlet.
INSTALLING THE HOOD
The hood is installed on the wall using the following steps:
1
Measure out and mark the two "keyho-
les" on the wall.
x2
THERMEX VERTICAL 260 59
2
Drill the holes into the wall using a
suitable drill for the type of wall.
x2