Installation - THERMEx DAX Instrucciones De Montaje

M 540235068209082018

INSTALLATION

The hood is available with an internal motor or for installation with an external motor. The kitchen hood can be used with the exhaust venting
into the open air or for recirculation of air. It is also possible to install the hood using two different options.
Follow the instructions in this guide that match the model that you have purchased and the way in which you wish to install the exhaust outlet.
INSTALLATION USING BRAcKETS
The two brackets on the top of the hood can be used when installing the hood.
1
Measure out and mark the position of the
holes in the two brackets.
4
x2
x2
Mount the hood using two screws that
match the material into which they are be-
ing screwed.
2
x2
Drill the holes into the wall using a suitable
drill for the type of wall.
5
Install the exhaust outlet on the hood.
NOTE: This only applies when venting into
open air.
3
x2
Ensure that the rawlplugs are suitable for
the wall material in question and insert them
into the pre-drilled holes.
THERMEX DAx 47
x2