Installation Instructions - Cooper Lighting Crosstour MAXX LED Instrucciones De Instalación

Lámpara de pared
Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS

IMPORTANT: READ BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before starting installation or attempting any maintenance.
DOOR INSTALLATION
6. Ensure all electrical wires and connections are secured in the back box, re-install door and tighten
door screw to 15-20 inch lbs.
MAINTENANCE
NOTE: A regular maintenance schedule should be followed to retain optimal light output and thermal
performance. Optical lens cleaning should be performed with a clean dry cloth to remove any dust or
other contaminants. Additional lens cleaning should be performed with non-abrasive acrylic cleanser.
Remove any dirt, leaves, or other foreign debris from the housing and fins. Clean water may be used to
flush the fins.
WIRING DIAGRAMS
Connect all
Ground Wires First
Current Draw (Amps)
Model Series
Voltage
XTOR5A
XTOR9A
120V
0.43A
0.72A
208V
0.25A
0.41A
240V
0.22A
0.36A
277V
0.20A
0.32A
347V
0.16A
0.26A
480V
0.12A
0.19A
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user's purpose, please contact
your nearest representative. NOTE: Specifications and dimensions subject to change without notice.
Customer First Center
1121 Highway 74 South
Peachtree City, GA 30269
P: 770.486.4800 F: 770.486.4801
www.cooperlighting.com
ADH121888
Without Photocontrol
Without Photocontrol
Driver
Driver
Load (Black)
Load (Black)
Factory Wired
Factory Wired
Driver to LED
Driver to LED
Neutral (White)
Neutral (White)
With Photocontrol
With Photocontrol
Driver
Driver
Load (Black)
Load (Black)
Factory Wired
Factory Wired
Driver to LED
Driver to LED
Neutral
Neutral
(White)
(White)
Load (Red)
Load (Red)
Neutral (White)
Neutral (White)
Line (Black)
Line (Black)
Supply Line (Black)
Supply Line (Black)
Photocontrol
Photocontrol
347V/480V without Photocontrol
347V/480V without Photocontrol
Supply
Supply
Line (Black)
Line (Black)
Factory Wired
Factory Wired
Driver to LED
Driver to LED
Supply
Supply
Load (Violet)
Neutral (White)
Neutral (White)
XFMR
XFMR
347V/480V with Photocontrol
347V/480V with Photocontrol
Factory Wired
Factory Wired
Driver to LED
Driver to LED
Supply
Supply
Neutral (White)
Neutral (White)
Photocontrol
Photocontrol
XFMR
XFMR
Crosstour
MAXX LED
TM
Wall Mount Luminaire
Sheet 2 of 6
2/4/2013
FIG. 4
Locking
Hinges
(3) Lever-Lock
Connectors
Driver
Driver
Neutral (White)
Neutral (White)
Line (Black)
Line (Black)
Supply
Supply
Neutral (White)
Neutral (White)
Connect Supply Line
Connect Supply Line
Neutral
Neutral
347V
347V
Here for 347V Application
Here for 347V Application
Load (Violet)
(White)
(White)
(Orange)
(Orange)
Supply Line (Black)
Supply Line (Black)
480V (Violet/White)
480V (Violet/White)
Connect Supply Line
Connect Supply Line
Here for 480V Application
Here for 480V Application
Driver
Driver
Neutral (White)
Neutral (White)
Line (Black)
Line (Black)
Supply
Supply
Neutral (White)
Neutral (White)
Load (Red)
Load (Red)
Neutral (White)
Neutral (White)
Connect Supply Line
Connect Supply Line
Line (Black)
Line (Black)
Here for 347V Application
Here for 347V Application
Neutral
Neutral
347V
347V
Load (Violet)
Load (Violet)
(White)
(White)
(Orange)
(Orange)
Supply Line (Black)
Supply Line (Black)
480V (Violet/White)
480V (Violet/White)
Connect Supply Line
Connect Supply Line
Here for 480V Application
Here for 480V Application
IMI-784
loading