Tabla de contenido
Fig. 28a
NEVER hang a swing seat by a
partial link of chain! Remove and
discard partial links.
Fig. 28b
Fig. 28
1. Hold the swing seat vertically and insert uncoated chains through
2. Place one covered chain onto each harness so that it fits at the top
3. Hang the chains from the nylon bushing swing hangers. Crimp the
Fig. 28c
Swing Seat Assembly.
the channels on the bottom of the swing seat. Note: A coat
hanger may be used to help pull chain through the swing seat.
One full link should show at each end of the seat (Fig. 28).
of the V-hanger. Insert uncoated chains to bottom vinyl hooks of
V-hanger.(Fig. 28a). Crimp harness end closed.
CAUTION: It is important that you crimp harness ends
completely closed before using (see Fig. 28b). Place end
of harness with hooks on a hard surface and force hooks closed
with a hammer or squeeze closed with a pliers until parts are
touching. WARNING: Open hooks can cause deep cuts.
hook opening closed with a pliers to secure the chains to the
swing hangers (Fig. 28c). Make sure all connections are tightly
crimped and secure before using swing seat.
35
Assembly Plan
Tabla de contenido
