Playcore Swing-N-Slide PB 9242 Instrucciones De Ensamblaje página 31

Fig. 24
(3) [PF 4282] 2'' x 4'' x 20-3/8''
1-1/4'' Lag Screw
Monkeybar Assembly:
1. Attach (3) Monkey Bar Steps as shown in (Fig. 24).
2. Attach (4) Monkey Bar Rungs as shown in (Fig. 24a).
3. Attach (2) 'L' Brackets as shown in (Fig. 24b).
Pre-Drill Note: To prevent wood from splitting, pre-drill all holes for the Monkey Bar Rungs and 'L' Brackets. Use a
1/8'' drill bit & drill to a maximum depth of the length of the Lag Screw used.
(3)
30mm
screws
per bracket
30mm Wood Screw
Fig. 24a
10-3/4''
11''
11''
11''
Fig. 24b
(3)
1-1/4'' Lag
screws
per bracket
31
Assembly Plan
23-3/8''
(2)
2'' Lag
screws
per rung
(4)
23-1/4'' Monkey Bar
Rungs
(2)
[PF 4353]
2'' x 4'' x 47-1/2"
Pre-Drill
FLUSH
'L' Brackets
2'' Lag screw
(2)