Tabla de contenido
Assembly Plan
Fig. 25
FLUSH
FLUSH
Pre-Drill
1-1/4'' Lag screw
Monkey Bar Assembly Cont.
1. Attach the Monkey Bar Frame to the Monkey Bar Ladder as shown in (Fig. 25).
2. Dig (2) 8'' diameter holes, 16'' deep, at the locations shown in (Fig. 25b).
3. Attach the Monkey Bar Ladder to the unit as shown in (Fig. 25a) and (Fig. 25b).
Pre-Drill Note: To prevent wood from splitting, pre-drill the (6) holes for the 1-1/4'' Lag Screws. Use a 1/8'' drill
bit & drill to a maximum depth of 1-1/4''.
4. Level the assembly, fill in holes and compact earth around posts.
(3)
1-1/4'' Lag Screws
per bracket
11"
8'' Diameter
25-1/2''
32
Fig. 25a
FLUSH
(3)
1-1/4'' Lag
Screws
per bracket
(3)
3-1/2''
1-1/4'' Lag screws
per bracket
Fig. 25b
74-1/2"
16"
57''
Tabla de contenido
