Playcore Swing-N-Slide PB 9242 Instrucciones De Ensamblaje página 25

Fig. 19
x2
2-1/2''
[PF 4350]
2'' x 2'' x 24''
2-1/2'' screws
Pre-Drill
pre-taladro
Fig. 19b
(2)
1-1/2'' screws
per joint
Tarp Washer
Roof Assembly.
1. Assemble (2) A-Frames as shown in (Fig. 19).
2. Attach (3) Roof Supports as shown in (Fig. 19a).
Note: Secure boards in place by installing screws from the outside of the A-frame.
3. Attach A-Frames together as shown in (Fig. 19b).
4. Install Tarp as shown in (Fig. 19c).
(2)
1-1/2'' screws
per joint
(1) [PF 4335] 1'' x 6'' x 12'' Gable Top
2-1/2''
(1) [PF 4333] 1'' x 4'' x 18-3/4'' Gable Bottom
(2)
per joint
FLUSH
1-1/8''
GAP on Both Sides
3/4'' screw
(2)
2-1/2'' screws
FLUSH
per joint
Fig. 19c
Washer
3/4'' Screw
3 Per Side
1-1/2'' screw
2-1/2'' screw
25
Assembly Plan
Fig. 19a
FLUSH