Tabla de contenido
Assembly Plan
Fig. 23
6-5/8''
46-1/8''
1-1/4'' Lag Screw
Monkeybar Assembly:
1. Measure and place Monkey Bar Step Brackets and Boomerang Bracket on upright as shown in (Fig. 23).
Pre-Drill Note: To prevent wood from splitting, pre-drill the (3) holes for the 1-1/4'' Lag Screws. Use a 1/8'' drill
bit & drill to a maximum depth of 1-1/4''.
2. Reverse dimensions for the brackets on the opposite leg and repeat step 2.
FLUSH
x 2
35''
23-3/4''
30
Pre-Drill
(3)
1-1/4''
Lag screws
per bracket
(3)
30mm
screws
per bracket
48-1/4''
37''
25-7/8''
DETAIL OF
STEP BRACKET
Measure From
Arrows
30mm Wood Screw
Tabla de contenido
