Waeco MAGIC WATCH MWE-850-4DSM Instrucciones De Montaje Y De Uso página 40

Installing MAGIC WATCH
6.5 Fastening the display
Note the following information when selecting a place to fit the display:
The display must be easily visible when you are reversing.
The display must not be covered or damaged by any objects placed on
the boot cover.
Fit the display so that there is no danger of injury, for example when
sharply braking.
Caution!
Before making any drill holes, ensure that no electrical cables or
other parts of the vehicle can be damaged by drilling, sawing and
filing.
➤ Drill a hole with a diameter of 30 mm into the cladding on the right C col-
umn in which to mount the display.
The plug's polarity cannot be reversed: It can be only be plugged
into the connection in one way.
➤ Insert the display plug into the socket of the corresponding extension
cable (see fig. 15 A, page 7).
➤ Guide the extension cable to the control electronics and insert the plug of
the extension cable into the socket on the control electronics (see
fig. 15 B, page 7).
➤ Insert the display into the hole, until it latches into place.
40
magic watch